How to Seal a Plastic Beer Pong Table ( 3 Ways to Protect Table Safely )

Sealing a plastic beer pong table is an important step in protecting its surface from spills, stains, and general wear and tear. If the plastic table is not sealed, after some time it loses its color due to which it is not usable in front of the guests.

There are several ways to seal a plastic beer pong table, and in this in-depth answer, we’ll explore some of the most effective methods.

Don’t ignore the steps and steps we have mentioned and go through them thoroughly and then apply them to your table. Carelessness can damage the color of the table, so be careful.

Seal a Plastic Beer Pong Table with Epoxy Resin

Epoxy resin is a popular choice for sealing plastic beer pong tables because it provides a strong,
durable finish that can withstand heavy use. And are an excellent table protection solution. I put epoxy resin first because I think they are the best method. Steps to seal beer pong table using epoxy resin, must follow:

1. Clean the table surface with soap and water, and let it dry completely.
2. Sand the surface of the table with a fine-grit sandpaper to create a slightly rough surface that will help the epoxy adhere to the plastic.
3. Apply a thin coat of epoxy resin to the table using a foam roller or brush. Be sure to spread the resin evenly over the entire surface of the table.
4. Wait for the first coat to dry completely, and then apply a second coat of epoxy resin. This will help ensure a strong, durable finish.
5. Allow the table to dry completely before using. This can take anywhere from 24 to 48 hours, depending on the type of epoxy resin you are using.

 

Use Polyurethane to Seal a Plastic Table

Polyurethanes are materials that are a great option for sealing and protecting anything. Polyurethane plastic protects the table from wear and tear, is water and heat resistant. Read the given steps carefully and secure your table:

1.  Clean the table surface with soap and water, and let it dry completely.
2. Sand the surface of the table with a fine-grit sandpaper to create a slightly rough surface that will help the polyurethane adhere to the plastic.
3. Apply a thin coat of polyurethane to the table using a foam roller or brush. Be sure to spread the polyurethane evenly over the entire surface of the table.
4. Wait for the first coat to dry completely, and then apply a second coat of polyurethane. This will help ensure a strong, durable finish.
5. Allow the table to dry completely before using. This can take anywhere from 24 to 48 hours, depending on the type of polyurethane you are using.

 

Use of Sealant Spray to Seal The Plastic  Table

Spray sealant is a quick and easy way to seal a plastic beer pong table. If you are used to working quickly like me, then follow this procedure, because sealant sprays are capable of protecting the table in minutes. So use sealant spray keeping in mind the given steps:

1. Clean the table surface with soap and water, and let it dry completely.
2. Apply spray sealant to the surface of the table using a sweeping motion to ensure even coverage.
3. Wait for the sealant to dry completely, and then apply another coat if necessary.
4. Allow the table to dry completely before using it. This can take anywhere from a few hours to a day, depending on the type of spray sealant you are using.

 

Note : We have tried the methods mentioned above ourselves but you should proceed with caution. You should not apply it on a wet, dirty and hot table. There are several methods you can use to seal your table, but the three we’ve mentioned are epoxy resin, polyurethane, and spray sealant. Each method has its pros and cons, so make sure to choose the one that best suits your needs and budget. Regardless of which method you choose, be sure to follow the manufacturer’s instructions carefully to ensure a strong, durable seal that will last for years to come.